Derill welcome!/
Special lubrication industry leading brand
keywords：High temperature grease | Food Grade Lubricants
0755-84532807
PG8T-B-A3 precision grease is formulated with refined hydrocarbon oil，composite Lithium soap thickener, and antioxidant, anti-wear, anti-rust performance additives. It can be used in precision gear, precision bearings and other applications.
v Excellent wear resistance and wear resistance;
v Long service life, to ensure that the product's lifetime lubrication;
v Good noise reduction performance;
v Biodegradable, environmentally friendly lubricants.
Typical applications
v Gear reduction motor,worm gear motor that requires good adhesion and good noise reduction.
v Gear reduction motor and worm wheel and worm motor under middle load.
1. Good lubricating property: The product adopts advanced technology and scientific formula, use of imported raw materials, and adding advanced solid lubricant as additives, the grease has good lubricating performance, reduce friction, reduce wear.
2. Good resistance to high temperature characteristics: the use of special lithium soap thickener to form 3 grease, making the drop point higher, high temperature oil less, can run at high temperature for a long time, and extend the use of equipment.
3. Excellent wear resistance: the product can withstand a larger load, not easy to squeeze out from the gear gap, can maintain a longer attachment life, excellent wear resistance.
4. Excellent shear resistance: grease structure is stable, in severe shear and mixing conditions can still maintain consistency, to avoid the loss of the risk of thinning.
5. Good adhesion performance: the structure of lubricating grease is uniform, and it is very easy to adhere to the surface of the friction pair, form a compact physical adsorption film, which can well protect the friction pair.
6. Outstanding protection, excellent water resistance: the lubricating grease is adhered on the surface of the friction pair, and the friction pair is separated from the dust and moisture in the air, and the friction pair is good to protect the friction pair, and can be separated into the water between the friction pairs and has good water resistance performance.
7. Good material compatibility and rust proof, corrosion resistance: can be near the product material and good compatibility, to avoid deformation, crack, rust and other compatibility issues.
|
Index |
PG8T-B-A3 |
Test method |
|
Appearance |
Light yellow uniform ointment |
Visual inspection |
|
Penetration(25℃)，0.1mm |
223 |
GB/T 269 |
|
Dropping point，℃ |
219 |
GB/T 3498 |
|
Steel mesh points oil (100℃，24h)，% |
1.7 |
SH/T 0324 |
|
Evaporation(100℃，22h)，% |
1.1 |
GB/T 7325 |
|
Copper Corrosion(100℃，24h) |
Passed |
GB/T 7326 |
|
Temperature Range，℃ |
-20~120 |
- |
Address：Room 809, 8 Floor, Qizhengyuan Business Center, No.366 Ainan Road, Longgang District Shenzhen
Hotline：0755-84532807
Phone：(0755)84532807
Fax：(0755)29991061
